FIREMAN’S AXE

HONEYWELL MORNING PRIDE FIREMAN’S SUIT

IMPORTED FIREMAN’S SUIT HONEYWELL MORNING PRIDE JACKET AND PANTS (US)

KEY JACKET SPECIFICATIONS:

Outer shell: 7.5 oz Kevlar/Nomex
Thermal liner: 2 layer Spunlace/Meta-Aramid facecloth
Moisture barrier: PTFE/Nomex/ParaAramid
Foldover comfort chinstrap
Drag rescue strap
Inspection port liner
Take up straps to postman
Tabbed Nomex wristlets
Kevlar/Nomex hem patch with VELCRO® brand
1.5” VELCRO® brand and zipper coat closure
Half high bellows pockets: Kevlar/Nomex 6” H x 9” W x 1.5” D
Mic tab on the left chest, above radio pocket, 0.5” x 2.5”
Radio pocket, left chest, 8” H x 3” W x 2” D
Lanyard flashlight clip, right chest

KEY PANT SPECIFICATIONS:

Outer shell: 7.5 oz Kevlar/Nomex (PBI also available, please call in and ask for a Fire Equipment Specialist)
Thermal liner: two layer Spunlace/Meta-Aramid facecloth
Moisture barrier: PTFE/Nomex/ParaAramid
Narrow 1.5" VELCRO® brand fly with D-ring closure
PortlLiner
Detachable liner
Lime 3" cuff trim and 2-tone Scotchlite
Patented angled boot cuffs
BiFlex heat channel knees "sewn in"
Take up straps to postman
Bellows pockets 8" H x 8" W x 2" D

Certification – NFPA 1971

FIRE FIGHTING APPAREL

FIRE FIGHTING EQUIPMENT CABINET

IRE FIGHTING EQUIPMENT CABINET OD: 72” X 22” X 48” SPECIFICATIONS: - MADE OF STEEL PLATE CRS. COLOR: COSMIC RED - DOOR: MADE OF GLASS TEMPERED ¼” - HANDLE: MADE OF ALUMINUM - WITH HANGING ROD ON LEFT SIDE - TWO (2) FIXED SHELVES ON RIGHT SIDE - POWDER COATED: COSMIC RED - WITH HAMMER - CABINET ONLY Available in WITH WHEELS and WITHOUT WHEELS **For price and product availability please contact us at online@ecoequipment.net**

FIRE FIGHTING APPAREL

FIREMAN’S HELMET, FIREDEX 911

FIREMAN'S HELMET, FIREDEX 911 (YELLOW) CHIEFTAIN 911 WARRIOR HELMET (US)

All Chieftain Helmets are certified by SEI, Safety Equipment Institute, and either meet or exceed the following standards: NFPA 1971 Standard, 2007 Edition and CAN/CSA Z94.1-98 Standard. · Tough through-color, pigmented fiberglass is a reinforced, high-temperature composite shell. Resists cracking, chipping, sharp object penetration, and hides scratches. The long-lasting and easy-to-clean, high gloss, flame retardant finish resists scratches and ultra-violet rays. · Highly visible ReflexiteTM strips. · Fleece-lined NomexTM ear/neck cover increases protection. Longer ear cover fits tightly against helmet shell to prevent hot gas or flame from reaching inside helmet. · Three eye protection choices: polycarbonate 4-inch face shield, eye goggles, or 6-inch face shield. · Front headband height adjustment permits use with virtually all SCBA facemasks.

Impact insert made of heat insulating polyurethane foam is one-piece molded to a PC/ABS laminate flame-resistance inner liner.